ZIO V11

ZIO V11

Manuf (OEM/ODM): Netcore

FCC approval date: 02 October 2007
Country of manuf.: China

Type: wireless router

FCC ID: UFHV11

Power: 9 VDC, 0.7 A
Connector type: barrel

CPU1: Marvell 88W8510
FLA1: 512 KiB 0.5 MiB <br />524,288 B <br />4,096 Kib <br />4 Mib <br />4.882812e-4 GiB <br /> (KH KH29LV400CBTC-70G)
RAM1: 4 MiB 4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (ISSI IS42S16100C1-6TL × 2)

Expansion IFs: none specified

WI1 chip1: Marvell 88W8510
WI1 chip2: Marvell 88W8010
WI1 802dot11 protocols: bg
WI1 antenna connector: RP-SMA

ETH chip1: Marvell 88W8510
Switch: Marvell 88E6060
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1

bg

Default SSID: default (99 addl. devices)
Default IP address: 192.168.10.1
the IP 192.168.10.1 is used by 122 additional devices
of which 2 are ZIO devices

802dot11 OUI: none specified

For a list of all currently documented Marvell chipsets with specifications, see Marvell.

---

WirelessBuilder Wireless Broadband Router

"PB-724-M04G-00" and "DEC 05 2006" is silkscreened on the board in the FCC photos.

The same text was found on the Zonet ZSR1134WE's board.

Like other older MRVL gear, it's probably using eCos..

Default settings are per the FCC manual.

Probable used PSU(s)

The power supply shown in the FCC photos is an unbranded TP0900700A.

Brand? TP090700A (more)
Input: 100-240 VAC ~ 50/60 Hz, 0.2 A
Input connector: unknown Style: medium, horiz.  Manuf. in: China
Output: 9 VDC, 0.7 A
Output connector: barrel (center +)  OD: ??  ID: ??  LEN: ??