ZIO 3300N

ZIO 3300 N

(Est.) release date: 08 April 2011
Country of manuf.: China

Type: wireless router

Power: 5 VDC, 1 A
Connector type: barrel

CPU1: Realtek RTL8196C (390 MHz)
FLA1: 2 MiB2,097,152 B 16,384 Kib 2,048 KiB 16 Mib 0.00195 GiB  (Macronix MX25L1606EM2I-12G)
RAM1: 16 MiB16,777,216 B 131,072 Kib 16,384 KiB 128 Mib 0.0156 GiB  (EtronTech EM639165TS-6G)

Expansion IFs: none specified

WI1 chip1: Realtek RTL8192CE
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none

ETH chip1: Realtek RTL8196C
Switch: Realtek RTL8196C
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1

bgn

Stock bootloader: rtkload v1.1f

Stock FW OS: Linux 2.6.30.9 Realtek SDK v2.5-r7984

Default SSID: zio
Default IP address: 192.168.10.1
the IP 192.168.10.1 is used by 128 additional devices
of which 2 are ZIO devices

802dot11 OUI: 00:2E:00
Ethernet OUI: 00:2E:00

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

"ZIO-3300N (2011. Bless Inc.)", "ST-NR5TA", and "2011/04/08 VER:1.3" is silkscreened on the board.

Serial

Pinout

Info derived from

• boot log

Booting...
========== SPI =============

---RealTek(RTL8196C)at 2011.04.06-10:30+0900 version v1.1f [16bit](390MHz)
Jump to image start=0x80500000...
decompressing kernel:
Uncompressing Linux... done, booting the kernel.
done decompressing kernel.
start address: 0x80003600
RTL8192C/RTL8188C driver version 1.6 (2011-07-18)

Probing RTL8186 10/100 NIC-kenel stack size order[3]...
chip name: 8196C, chip revid: 0
NOT YET
eth0 added. vid=9 Member port 0x1...
eth1 added. vid=8 Member port 0x10...
eth2 added. vid=9 Member port 0x2...
eth3 added. vid=9 Member port 0x4...
eth4 added. vid=9 Member port 0x8...
[peth0] added, mapping to [eth1]...
init started: BusyBox v1.13.4 (2011-11-30 17:25:56 KST)
Init Start...
Init bridge interface...
Init Wlan application...
Init WAN Interface...
#

cat /proc/version

# cat /proc/version
Linux version 2.6.30.9 (root@minkyu-desktop) (gcc version 3.4.6-1.3.6) #47 Wed Nov 30 17:29:30 KST 2011

cat /proc/cmdline

# cat /proc/cmdline
console=ttyS0,38400 root=/dev/mtdblock1

cat /proc/meminfo + free

# cat /proc/meminfo
MemTotal:          11184 kB
MemFree:            1876 kB
Buffers:             720 kB
Cached:             3052 kB
SwapCached:            0 kB
Active:             1712 kB
Inactive:           2528 kB
Active(anon):        468 kB
Inactive(anon):        0 kB
Active(file):       1244 kB
Inactive(file):     2528 kB
SwapTotal:             0 kB
SwapFree:              0 kB
Dirty:                 0 kB
Writeback:             0 kB
AnonPages:           480 kB
Mapped:              584 kB
Slab:               4640 kB
SReclaimable:        248 kB
SUnreclaim:         4392 kB
PageTables:           84 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:        5592 kB
Committed_AS:       1516 kB
VmallocTotal:    1048404 kB
VmallocUsed:         264 kB
VmallocChunk:    1048136 kB
# free
              total         used         free       shared      buffers
  Mem:        11184         9312         1872            0          720
 Swap:            0            0            0
Total:        11184         9312         1872

cat /proc/mtd

# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00100000 00001000 "boot+cfg+linux"
mtd1: 00100000 00001000 "root fs"

ps aux

# ps aux
  PID USER       VSZ STAT COMMAND
    1 root      1216 S    init
    2 root         0 SW<  [kthreadd]
    3 root         0 SW<  [ksoftirqd/0]
    4 root         0 SW<  [events/0]
    5 root         0 SW<  [khelper]
    6 root         0 SW<  [async/mgr]
    7 root         0 SW<  [kblockd/0]
    8 root         0 SW   [pdflush]
    9 root         0 SW<  [kswapd0]
   10 root         0 SW<  [mtdblockd]
  140 root       956 S    udhcpd /var/udhcpd.conf
  161 root       948 S    udhcpc -i eth1 -p /etc/udhcpc/udhcpc-eth1.pid -s /usr
  170 root       916 S    reload -k /var/wlsch.conf
  185 root      1984 S    webs
  186 root      1224 S    -/bin/sh
  196 root      1216 R    ps aux

cat /proc/cpuinfo

# cat cpuinfo
system type             : RTL8196C
processor               : 0
cpu model               : 52481
BogoMIPS                : 389.12
tlb_entries             : 32
mips16 implemented      : yes

cat /etc/version

# cat version
RTL8196C v1.0 --  2011. 11. 30. (수) 17:27:20 KST
The SDK version is: Realtek SDK v2.5-r7984
Ethernet driver version is: 7953-7929
Wireless driver version is: 7977-7977
Fastpath source version is: 7873-6572
Feature support version is: 7927-7480