TRENDnet TEW-631BRP V1.0R

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

TRENDnet TEW-631BRP V1.0R

Manuf (OEM/ODM): U-MEDIA

FCC approval date: 26 July 2006
Country of manuf.: Taiwan

Type: wireless router

FCC ID: S9ZTEW631BRP

Power: 5 VDC, 2.5 A
Connector type: barrel

CPU1: Ubicom IP3023 (250 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Brand? Model?)
RAM1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Brand? Model?)

Expansion IFs: none specified

WI1 chip1: Atheros AR5416
WI1 chip2: Atheros AR2133
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x3:2
WI1 antenna connector: RP-SMA, U.FL

ETH chip1: Ubicom IP3023
Switch: Realtek RTL8306S
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1

bgn

Default IP address: 192.168.10.1
the IP 192.168.10.1 is used by 122 additional devices
of which 45 are TRENDnet devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 344 additional devices
of which 11 are TRENDnet devices

802dot11 OUI: none specified

 FCC ID
TRENDnet TEW-631BRP V2.0RS9ZTEW631BRP
SI5WRT372U

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Ubicom SoC's with specifications, see Ubicom.


300Mbps Wireless N Firewall Router

Downloads
  • Specs are per the submitted FCC internal photos.

4MB Flash and 8MB RAM seems weird for this device, however.

Additionally, there are multiple revisions of this device.

V2.0R and V3.0R seem to use the same firmware, but V1.0R does not.

This information may not be 100% accurate.

The device is shown as having two integral (L+R) and one removable (M)

antenna in one submission and 3 RP-SMA connectors in another.

The last submission also shows the device with a Ubicom IP5160U

rather than the IP3023 of the earlier ones (V1.0R).

See also