Microsoft MN-700
Microsoft MN-700 (3.0)
Availability: EoL
Manuf (OEM/ODM): Accton WG4005 -68 (CM)
FCC approval date: 30 June 2003
(Est.) release date: 06 August 2003
UPC: 805529291836 (UPC DB, On eBay)
Country of manuf.: Taiwan
Type: wireless router
FCC ID: C3KMN700, C3KMN730
IC ID: 3048A-MN700
PCB ID: 141400520001J
Power: 12 VDC, 1 A
Connector type: barrel, reverse gender core
CPU1: Broadcom BCM4702 (125 MHz)
FLA1: 4 MiB 4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Macronix Model?)
RAM1: 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Micron MT48LC4M32B2)
Expansion IFs: Mini PCI
Mini PCI slots: 1
JTAG: yes, 12-pin header, unpopulated, J10
Serial: possible, 10-pin header, no UART, unpopulated, J8
WI1 module: Broadcom BCM94306MP
WI1 module IF: Mini PCI
WI1 chip1: Broadcom BCM4306
WI1 chip2: Broadcom BCM2050
WI1 802dot11 protocols: bg
WI1 antenna connector: none
ETH chip1: Broadcom BCM4702
ETH chip2: Altima AC101L
Switch: Broadcom BCM5325A2
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bg
Additional chips
2.4GHz Power Amplifier IC;Micro Mobio;MMPA2406;2406, B11F;1;
Stock FW OS: Windows CE NET 4.2
TPFirmware supported: Oleg (wl500g) • (List), OpenWrt • (List | Dev | DLs), Tomato • (List | DLs), DD-WRT • (List)
Flags: Windows CE
Default SSID: MSHOME (1 addl. devices)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 295 additional devices
of which 2 are Microsoft devices
Default login user: blank
Default login password: admin
blank:admin credentials used by 300 additional devices
of which 2 are Microsoft devices
| FCC ID | |
|---|---|
| Microsoft MN-730 | C3KMN730 |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Microsoft Broadband Networking Wireless Base Station
For one particular production model MN-700...
- "MN-700", "REV 3.0", "(C) 2003 MICROSOFT CORPORATION", and
- "P/N: 141400520001J REV: 01" is silkscreened onto the top of the board.
- "MN-700" and "111362-30" is etched onto the bottom of the board.
- While there is a clearly marked UART header, the UART and assoc.
- components are all omitted. It's presumed to be usable if populated. Hopefully..
Links
- Microsoft MN700 hack project on wl500g.info
- MN700 internals on wl500g.info (via archive.org)
- Microsoft MN700 support on the DD-WRT Wiki
- This unit by default runs WinCE. To install DD-WRT (or any third party Linux
- firmware), the bootloader must be replaced.. which will require JTAG access.
See also
