Linksys WET610N
Linksys WET610N
Availability: common
Manuf (OEM/ODM): U-MEDIA WST-703S
Type: bridge
FCC ID: Q87-WET610N
IC ID: 3839A-WET610N
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Star STR9101
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Eon EN29LV640B-90TIP)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Hynix HY5DU561622ETP-5)
Expansion IFs: none specified
WI1 chip1: Metalink MtW8171
WI1 chip2: Metalink MtW8151
WI1 802dot11 protocols: abgn
WI1 MIMO config: 2x3:2
WI1 antenna connector: none
ETH chip1: Star STR9101
ETH chip2: Realtek RTL8201CP
LAN speed: 100M
LAN ports: 1
abgn
Flags: DFS
Default IP address: 169.254.1.250
the IP 169.254.1.250 is used by 2 additional devices
of which 1 are Linksys devices
Default login user: blank
Default login password: admin
blank:admin credentials used by 300 additional devices
of which 143 are Linksys devices
For a list of all currently documented Metalink chipsets with specifications, see Lantiq.
For a list of all currently documented Star (Cavium) SoC's with specifications, see Star.
Dual-Band N Entertainment Bridge
WET610N v1.0 serial numbers appear to start with PUA0.
"WST-703S Rev UC" is silkscreened on the board. This follows U-MEDIA convention and this is presumed to be a U-MEDIA device.
By default, the device requests for an IP via DHCP. 169.254.1.250 is the default IP if DHCP requests fail.
The hardware is the same as the Linksys WAP610N.
GPL code is mirrored here at Modem-Help. The files do not appear to be available from Cisco/Linksys' GPL code center.
