Jensen AL29150
Jensen AL29150 v6
Availability: Discontinued
Type: wireless router
FCC ID: V7T311R
Power: 9 VDC, 0.6 A
Connector type: barrel
CPU1: Broadcom BCM5356L (333 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Winbond W25Q32VSIG)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Winbond W9812G6IH-6)
Expansion IFs: none specified
Serial: yes, 4-pin header, 3.3V TTL, (115200 8N1), J3
WI1 chip1: Broadcom BCM5356L
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: Fixed Non-Removable
ETH chip1: Broadcom BCM5356L
Switch: Broadcom BCM5356L
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Stock bootloader: CFE 5.100.138.3
Stock FW OS: Linux eCos
Default SSID: AirLinkXXXXXX (1 addl. devices)
Default IP address: 192.168.38.1
the IP 192.168.38.1 is used by 1 additional devices
of which 1 are Jensen devices
Default login user: admin
Default login password: 1234
admin:1234 credentials used by 188 additional devices
of which 1 are Jensen devices
| FCC ID | |
|---|---|
| Tenda W311R v3 | V7T311R |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Jensen AirLink 29150
Reviews
Serial
- CPU: Broadcom BCM47XX; @300MHz
- Flash: Serial flash (ST); total size: 4MB
- RAM: SDRAM; tot mem: 16384 KB (16MB)
Boot log
| • bootlog • >> |
|---|
Decompressing...done
CFE version 5.100.138.3 based on BBP 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: 2011-05-26 10:33:50 4 (richard@aeteam.com)
Copyright (C) 2000-2008 Broadcom Corporation.
Init Arena
Init Devs.
Boot partition size = 131072(0x20000)
Found an ST compatible serial flash with 64 64KB blocks; total size 4MB
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138.3
CPU type 0x19749: 300MHz
Tot mem: 16384 KBytes
CFE mem: 0x80700000 - 0x80798550 (623952)
Data: 0x8072E3A0 - 0x807315C0 (12832)
BSS: 0x807315C0 - 0x80732550 (3984)
Heap: 0x80732550 - 0x80796550 (409600)
Stack: 0x80796550 - 0x80798550 (8192)
Text: 0x80700000 - 0x8072E39C (189340)
Device eth0: hwaddr 34-21-09-19-17-40, ipaddr 192.168.38.1, mask 255.255.255.0
gateway not set, nameserver not set
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: ..... 2750828 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
IP Filter: v3.4.35 initialized. Default = pass all, Logging = disabled
PCI: no core
PCI: no core
PCI: Fixing up bus 0
wl_pci_probe: find [14e4:4329] bus 0 slot 1 func 0 irq 1
eCos Router/AP V5.110.27.21 (Compiled at 21:29:05 on Mar 16 2013)
sys_led_test_gpio=6
Using pin 6 for sys_led output
wps_led_test_gpio=7
System start
vlan1: VLAN interface created
vlan2: VLAN interface created
wlconf: PHYTYPE: 4
Current channel = 6
EAPD task started
initWebs: lanip=[192.168.38.1]
NAS task started
CLI>
|
Images
