Dynalink RTA1025W

Dynalink RTA1025W
Availability: now

Manuf (OEM/ODM): Askey RTA1025W

(Est.) release date: June 2008

Type: wireless router, dsl modem

Power: 12 VDC, 1 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2.1 mm (ID)

CPU1: Broadcom BCM6348
FLA1: 4 MiB4,194,304 B 32,768 Kib 4,096 KiB 32 Mib 0.00391 GiB  (Brand? Model?)
RAM1: 16 MiB16,777,216 B 131,072 Kib 16,384 KiB 128 Mib 0.0156 GiB  (Brand? Model?)

Expansion IFs: none specified

WI1 chip1: Broadcom BCM4318
WI1 802dot11 protocols: bg
WI1 antenna connector: none

ETH chip1: Broadcom BCM6348
Switch: Broadcom BCM5325E
LAN speed: 100M
LAN ports: 4

Additional chips
ADSL Line Driver;Broadcom;BCM6301KSG;;1;

Flags: ADSL2+

Default SSID: RTA1025W-XXXXXX
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1317 additional devices
of which 0 are Dynalink devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1332 additional devices
of which 0 are Dynalink devices

802dot11 OUI: none specified

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

ADSL2+ Wireless Router

Support page • Manual

The default SSID appears to be RTA1025W-XXXXXX, where XXXXXX is the last

three octets of the wireless interface MAC address (upper case letters).

Has same hardware as NetComm NB6Plus4W and ZTE ZXDSL 531BII

(but different casing).

Per this post on the DD-WRT forums, this device uses BCM6348.

Dynalink RTA1025W on whirlpool.net.au

Dynalink RTA1025W

ADSL2+ Wireless Router

See also

Navigation menu

Search