Dell TrueMobile 2300 v2 (WRTB-107GD)
Jump to navigation
Jump to search
Dell TrueMobile 2300 v2 (WRTB-107GD) A00
Availability: EoL
Manuf (OEM/ODM): Gemtek WRTB-107GD
FCC approval date: 24 December 2003
Country of manuf.: Taiwan
Type: wireless router
FCC ID: MXF-R921212G
IC ID: 3069B-WRTB107G
Power: 5 VDC, 2 A
Connector type: barrel
CPU1: Broadcom BCM4712 (200 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Intel TW28F320J3C110)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (GLT GLT5640L16-6TC × 2)
Expansion IFs: none specified
WI1 chip1: Broadcom BCM4712
WI1 chip2: Broadcom BCM2050
WI1 802dot11 protocols: bg
WI1 antenna connector: none
ETH chip1: Broadcom BCM4712
Switch: ADMtek ADM6996L
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bg
Default SSID: wireless (10 addl. devices)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 297 additional devices
of which 3 are Dell devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1332 additional devices
of which 5 are Dell devices
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| Dell TrueMobile 2300 v1 (WX-5565D) | Broadcom | Broadcom | Broadcom |
| Dell TrueMobile 2300 v2 (WRTB-107GD) | Broadcom | Broadcom | Broadcom |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Dell TrueMobile 2300
- OEM: Gemtek WRTB-107GD (WRTB-107GD340)
Links
DD-WRT officially supports this device. Tomato will, unofficially, load on it as well.. and it seems
- Broadband-Hamnet, which would seem to be OpenWrt based, also seems to function
- (it will at least boot, broadcast an SSID, and is accessible via HTTP interface).
Serial info
| • Tomato 1.28 dmesg • >> |
|---|
# dmesg CPU revision is: 00029007 Primary instruction cache 8kb, linesize 16 bytes (2 ways) Primary data cache 4kb, linesize 16 bytes (2 ways) Linux version 2.4.20 (root@tobu) (gcc version 3.2.3 with Broadcom modifications) #1 Sun Jun 27 20:13:35 PDT 2010 Setting the PFC value as 0x15 Determined physical RAM map: memory: 01000000 @ 00000000 (usable) On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200 CPU: BCM4712 rev 1 at 200 MHz Calibrating delay loop... 199.47 BogoMIPS Memory: 14464k/16384k available (1336k kernel code, 1920k reserved, 108k data, 64k init, 0k highmem) Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) Inode cache hash table entries: 1024 (order: 1, 8192 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX PCI: Disabled PCI: Fixing up bus 0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 squashfs: version 3.0 (2006/03/15) Phillip Lougher pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0xb8000300 (irq = 3) is a 16550A ttyS01 at 0xb8000400 (irq = 0) is a 16550A HDLC line discipline: version $Revision: 1.1.1.4 $, maxframe=4096 N_HDLC line discipline registered. PPP generic driver version 2.4.2 Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0 Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0 Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0 Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0 number of CFI chips: 1 0: offset=0x0,size=0x20000,blocks=32 Flash device: 0x400000 at 0x1c000000 Creating 5 MTD partitions on "Physically mapped flash": 0x00000000-0x00040000 : "pmon" 0x00040000-0x003e0000 : "linux" 0x000e2a10-0x00300000 : "rootfs" 0x00300000-0x003e0000 : "jffs2" 0x003e0000-0x00400000 : "nvram" sflash: found no supported devices NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 2048) Linux IP multicast router 0.06 plus PIM-SM ip_conntrack version 2.1 (8092 buckets, 4096 max) - 368 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 64k freed Algorithmics/MIPS FPU Emulator v1.5 ip_conntrack_pptp version 1.9 loaded ip_nat_pptp version 1.5 loaded ip_conntrack_rtsp v0.01 loading ip_nat_rtsp v0.01 loading eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.38.0 eth1: Broadcom BCM4320 802.11 Wireless Controller 3.90.38.0 tomato_ct.c [Jun 27 2010 20:15:22] vlan0: dev_set_promiscuity(master, 1) device eth0 entered promiscuous mode device vlan0 entered promiscuous mode device eth1 entered promiscuous mode br0: port 2(eth1) entering listening state br0: port 1(vlan0) entering listening state br0: port 2(eth1) entering learning state br0: port 1(vlan0) entering learning state vlan1: Setting MAC address to 00 90 4b 3b 07 f9. br0: port 2(eth1) entering forwarding state br0: topology change detected, propagating br0: port 1(vlan0) entering forwarding state br0: topology change detected, propagating vlan1: add 01:00:5e:00:00:01 mcast address to master interface |
| • OpenWrt Attitude Adjustment 12.09 dmesg • >> |
|---|
root@OpenWrt:~# dmesg
[ 0.000000] Linux version 3.3.8 (blogic@Debian-60-squeeze-64-minimal)
(gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) )
#1 Sat Mar 23 16:01:31 UTC 2013
[ 0.000000] CPU revision is: 00029007 (Broadcom BMIPS3300)
[ 0.000000] bcm47xx: using ssb bus
[ 0.000000] ssb: Found chip with id 0x4712, rev 0x01 and package 0x00
[ 0.000000] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x09, vendor 0x4243)
[ 0.000000] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x07, vendor 0x4243)
[ 0.000000] ssb: Core 2 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[ 0.000000] ssb: Core 3 found: USB 1.1 Device (cc 0x818, rev 0x01, vendor 0x4243)
[ 0.000000] ssb: Core 4 found: USB 1.1 Host (cc 0x817, rev 0x01, vendor 0x4243)
[ 0.000000] ssb: Core 5 found: MIPS 3302 (cc 0x816, rev 0x01, vendor 0x4243)
[ 0.000000] ssb: Core 6 found: MEMC SDRAM (cc 0x80F, rev 0x01, vendor 0x4243)
[ 0.000000] ssb: Core 7 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[ 0.000000] ssb: chipcommon status is 0x0
[ 0.000000] ssb: Initializing MIPS core...
[ 0.000000] ssb: set_irq: core 0x0812, irq 4 => 4
[ 0.000000] ssb: set_irq: core 0x0806, irq 5 => 5
[ 0.000000] ssb: set_irq: core 0x0818, irq 6 => 2
[ 0.000000] ssb: set_irq: core 0x0804, irq 2 => 6
[ 0.000000] ssb: after irq reconfiguration
[ 0.000000] ssb: core 0x0800, irq : 2(S) 3* 4 5 6 D I
[ 0.000000] ssb: core 0x0812, irq : 2(S) 3 4* 5 6 D I
[ 0.000000] ssb: core 0x0806, irq : 2(S) 3 4 5* 6 D I
[ 0.000000] ssb: core 0x0818, irq : 2(S)* 3 4 5 6 D I
[ 0.000000] ssb: core 0x0817, irq : 2(S)* 3 4 5 6 D I
[ 0.000000] ssb: core 0x0816, irq : 2(S)* 3 4 5 6 D I
[ 0.000000] ssb: core 0x080f, irq : 2(S) 3 4 5 6 D I*
[ 0.000000] ssb: core 0x0804, irq : 2(S) 3 4 5 6* D I
[ 0.000000] found parallel flash.
[ 0.000000] can not parse nvram name (null)ag0(null) with value 255 got -34
[ 0.000000] ssb: Sonics Silicon Backplane found at address 0x18000000
[ 0.000000] Serial init done.
[ 0.000000] gpiochip_add: registered GPIOs 0 to 15 on device: bcm47xx
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 01000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00001000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00001000
[ 0.000000] On node 0 totalpages: 4096
[ 0.000000] free_area_init_node: node 0, pgdat 802da6d0, node_mem_map 80340000
[ 0.000000] Normal zone: 32 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 4064 pages, LIFO batch:0
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 4064
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 64 (order: -4, 256 bytes)
[ 0.000000] Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Primary instruction cache 8kB, VIPT, 2-way, linesize 16 bytes.
[ 0.000000] Primary data cache 4kB, 2-way, VIPT, no aliases, linesize 16 bytes
[ 0.000000] Memory: 12856k/16384k available (2540k kernel code, 3528k reserved, 379k data, 168k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.000000] console [ttyS0] enabled
[ 0.004000] Calibrating delay loop... 197.63 BogoMIPS (lpj=395264)
[ 0.044000] pid_max: default: 32768 minimum: 301
[ 0.048000] Mount-cache hash table entries: 512
[ 0.060000] NET: Registered protocol family 16
[ 0.128000] bio: create slab <bio-0> at 0
[ 0.148000] Switching to clocksource MIPS
[ 0.176000] ssb: PCIcore in host mode found
[ 0.488000] PCI host bridge to bus 0000:00
[ 0.492000] pci_bus 0000:00: root bus resource [mem 0x40000000-0x7fffffff]
[ 0.500000] pci_bus 0000:00: root bus resource [io 0x0100-0x07ff]
[ 0.508000] pci 0000:00:00.0: [14e4:4712] type 0 class 0x000600
[ 0.508000] PCI: Fixing up bridge 0000:00:00.0
[ 0.512000] pci 0000:00:00.0: setting latency timer to 64
[ 0.512000] PCI: Fixing up device 0000:00:00.0
[ 0.516000] PCI: Fixing latency timer of device 0000:00:00.0 to 168
[ 0.524000] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x00001fff]
[ 0.524000] pci 0000:00:00.0: reg 14: [mem 0x00000000-0x07ffffff pref]
[ 0.544000] NET: Registered protocol family 2
[ 0.548000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.560000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 0.564000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.572000] TCP: Hash tables configured (established 512 bind 512)
[ 0.580000] TCP reno registered
[ 0.584000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.588000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.596000] NET: Registered protocol family 1
[ 0.600000] PCI: CLS 0 bytes, default 16
[ 0.616000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.624000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.636000] msgmni has been set to 25
[ 0.640000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.648000] io scheduler noop registered
[ 0.652000] io scheduler deadline registered (default)
[ 0.660000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.692000] serial8250: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
[ 0.720000] serial8250: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
[ 0.776000] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
[ 0.808000] serial8250.0: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
[ 0.828000] bcm47xx_pflash: flash init: 0x1c000000 0x02000000
[ 0.832000] Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000089 Chip ID 0x000016
[ 0.844000] Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
[ 0.844000] Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
[ 0.844000] Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
[ 0.844000] Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
[ 0.844000] Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
[ 0.844000] Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
[ 0.844000] Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
[ 0.844000] Intel/Sharp Extended Query Table at 0x0031
[ 0.852000] Intel/Sharp Extended Query Table at 0x0031
[ 0.856000] Using buffer write method
[ 0.860000] cfi_cmdset_0001: Erase suspend on write enabled
[ 0.864000] erase region 0: offset=0x0,size=0x20000,blocks=32
[ 0.864000] bcm47xx_pflash: Flash device: 0x2000000 at 0x1fc00000
[ 0.872000] bcm47xx_part: bootloader size: 262144
[ 0.880000] bcm47xx_part: Looking for dual image
[ 0.888000] bcm47xx_part: TRX offset : 0
[ 0.892000] 4 bcm47xx partitions found on MTD device Physically mapped flash
[ 0.900000] Creating 4 MTD partitions on "Physically mapped flash":
[ 0.908000] 0x000000000000-0x000000040000 : "cfe"
[ 0.920000] 0x000000040000-0x0000003e0000 : "linux"
[ 0.936000] 0x000000133c00-0x0000003e0000 : "rootfs"
[ 0.940000] mtd: partition "rootfs" must either start or end on erase block boundary
or be smaller than an erase block -- forcing read-only
[ 0.964000] mtd: partition "rootfs" set to be root filesystem
[ 0.972000] mtd: partition "rootfs_data" created automatically, ofs=320000, len=C0000
[ 0.980000] 0x000000320000-0x0000003e0000 : "rootfs_data"
[ 0.996000] 0x0000003e0000-0x000000400000 : "nvram"
[ 1.016000] bcm47xx_sflash: error registering platform driver: -19
[ 1.024000] bcm47xx_nflash: error registering platform driver: -19
[ 1.032000] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
[ 1.048000] b44 ssb0:1: eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:90:4b:3b:07:f8
[ 1.060000] BCM47xx Watchdog Timer enabled (30 seconds, nowayout)
[ 1.068000] TCP cubic registered
[ 1.072000] NET: Registered protocol family 17
[ 1.080000] Bridge firewalling registered
[ 1.084000] 8021q: 802.1Q VLAN Support v1.8
[ 1.104000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 1.116000] Freeing unused kernel memory: 168k freed
[ 6.324000] diag: Detected 'Dell TrueMobile 2300 v2'
[ 6.420000] b44 ssb0:1: eth0: Link is up at 100 Mbps, full duplex
[ 6.424000] b44 ssb0:1: eth0: Flow control is off for TX and off for RX
[ 7.668000] roboswitch: Probing device eth0: No Robo switch in managed mode found, phy_id = 0xffffffff
[ 7.680000] roboswitch: Probing device eth1: No such device
[ 7.684000] roboswitch: Probing device eth2: No such device
[ 7.692000] roboswitch: Probing device eth3: No such device
[ 16.456000] JFFS2 notice: (336) jffs2_build_xattr_subsystem: complete building xattr subsystem,
1 of xdatum (0 unchecked, 0 orphan) and 6 of xref (0 dead, 2 orphan) found.
[ 18.176000] b44 ssb0:1: eth0: powering down PHY
[ 24.960000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[ 24.968000] Backport based on wireless-testing.git master-2012-09-07
[ 24.972000] compat.git: wireless-testing.git
[ 25.076000] cfg80211: Calling CRDA to update world regulatory domain
[ 25.080000] cfg80211: World regulatory domain updated:
[ 25.088000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 25.096000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.104000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 25.112000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 25.120000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.128000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.448000] There is already a switch registered on the device 'eth0'
[ 25.456000] roboswitch: Probing device eth1: No such device
[ 25.460000] roboswitch: Probing device eth2: No such device
[ 25.464000] roboswitch: Probing device eth3: No such device
[ 26.572000] b43-phy0: Broadcom 4712 WLAN found (core revision 7)
[ 26.600000] b43-phy0: Found PHY: Analog 2, Type 2 (G), Revision 2
[ 26.628000] Broadcom 43xx driver loaded [ Features: PNL ]
[ 26.768000] Broadcom 43xx-legacy driver loaded [ Features: PLID ]
[ 27.732000] PPP generic driver version 2.4.2
[ 28.168000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 28.352000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 28.860000] NET: Registered protocol family 24
[ 28.932000] nf_conntrack version 0.5.0 (203 buckets, 812 max)
[ 35.808000] b44 ssb0:1: eth0: Link is up at 100 Mbps, full duplex
[ 35.812000] b44 ssb0:1: eth0: Flow control is off for TX and off for RX
[ 45.960000] b44 ssb0:1: eth0: powering down PHY
[ 46.020000] b44 ssb0:1: eth0: Link is up at 100 Mbps, full duplex
[ 46.024000] b44 ssb0:1: eth0: Flow control is off for TX and off for RX
[ 46.084000] device eth0.0 entered promiscuous mode
[ 46.092000] device eth0 entered promiscuous mode
[ 46.112000] br-lan: port 1(eth0.0) entered forwarding state
[ 46.116000] br-lan: port 1(eth0.0) entered forwarding state
[ 48.120000] br-lan: port 1(eth0.0) entered forwarding state
|
Images
board top
board bottom
