D-Link DWL-G730AP rev A1
D-Link DWL-G730AP A1
Manuf (OEM/ODM): Global Sun WL AP 2454 NM1
FCC approval date: 08 September 2004
Type: access point
FCC ID: KA2DWLG730APA1
Power: 5 VDC, 1.2 A
Connector type: barrel
CPU1: Marvell 88W8510
FLA1: 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (Intel TE28F160C3BD70)
RAM1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Hynix HY57V643220CT-6)
Expansion IFs: none specified
WI1 chip1: Marvell 88W8510
WI1 chip2: Marvell 88W8000
WI1 802dot11 protocols: bg
WI1 antenna connector: none
ETH chip1: Marvell 88W8510
LAN speed: 100M
WAN speed: 100M
WAN ports: 1
bg
Default SSID: default (99 addl. devices)
Default IP address: 192.168.0.30
the IP 192.168.0.30 is used by 7 additional devices
of which 6 are D-Link devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 344 additional devices
of which 180 are D-Link devices
802dot11 OUI: none specified
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| D-Link DWL-G730AP rev A1 | Marvell | Marvell | Marvell |
| D-Link DWL-G730AP rev B1 | Marvell | Marvell | Marvell |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
"WL AP 2454 NM1" and "VER:T1.2" appears to be silkscreened on the board in the FCC photos.
Per the manual and interface emulator, the default SSID is default.
The FCC manual states the default SSID is default.
