D-Link DWL-700AP rev A1
D-Link DWL-700AP A1
Manuf (OEM/ODM): PESI WA254D
FCC approval date: 26 June 2003
Type: access point
FCC ID: KA2DWL700AP-A1
Power: 5 VDC, 2 A
Connector type: barrel
CPU1: ADMtek ADM8628
FLA1: 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (SST 39VF016-70-4C-EI)
RAM1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Hynix HY57V643220CT-7)
Expansion IFs: none specified
WI1 chip1: ADMtek ADM8628
WI1 chip2: RFMD RF3000
WI1 chip3: RFMD RF2958
WI1 802dot11 protocols: b
WI1 antenna connector: RP-SMA
ETH chip1: ADMtek ADM8628
LAN speed: unspecified
LAN ports: 1
b
Flags: schematics
Default SSID: default (99 addl. devices)
Default IP address: 192.168.0.50
the IP 192.168.0.50 is used by 63 additional devices
of which 63 are D-Link devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 344 additional devices
of which 180 are D-Link devices
802dot11 OUI: none specified
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| D-Link DWL-700AP rev A1 | ADMtek | ADMtek | RFMD |
| D-Link DWL-700AP rev A2 | ADMtek | ADMtek | RFMD |
| D-Link DWL-700AP rev B1 | Realtek | Realtek |
For a list of all currently documented ADMtek chipsets with specifications, see ADMtek.
"41713-82902-01" is silkscreened on the board in the FCC photos. "WA254D-01" is on the front of the board.
Default settings are per the FCC manual.
