D-Link DVA-G3810BN/TL
Jump to navigation
Jump to search
D-Link DVA-G3810BN/TL A1
Manuf (OEM/ODM): Cameo
FCC approval date: 03 October 2007
Type: wireless router, dsl modem, analog phone gateway
FCC ID: KA2VAG3810BNA1
IC ID: 4216A-VAG3810BN
US: 3P7DL01BDVAG3810B
Power: 12 VDC, 2.1 A
Connector type: barrel
CPU1: Broadcom BCM6358 (300 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Spansion S29GL064A90TFIR3)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (PSC A3S56D40ETP-G5)
Expansion IFs: Mini PCI, USB 2.0
Mini PCI slots: 1
USB ports: 1
Serial: yes, internal, 6-pin header, populated, 3.3V TTL, (115200,8,N,1), J4
WI1 module: Cameo WLG-1308
WI1 module IF: Mini PCI
WI1 chip1: Broadcom BCM4318
WI1 802dot11 protocols: bg
WI1 antenna connector: U.FL
ETH chip1: Broadcom BCM6358
Switch: Broadcom BCM5325F
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bg
Stock bootloader: CFE 1.0.37-12.1 BCM96358
Stock FW OS: Linux 2.6.16.14 OpenRG
Flags: ADSL2+, HomePNA (coax)
Default SSID: telusXXX
Default IP address: 192.168.1.254
the IP 192.168.1.254 is used by 158 additional devices
of which 0 are D-Link devices
Default login user: admin
Default login password: telus
admin:telus credentials used by 1 additional devices
of which 0 are D-Link devices
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
The FCC ID is strictly for the Cameo wireless module.
- "21514WLG13081A1" and "WLG-1308" is silkscreened on the wireless module's board in the FCC photos.
- BCM6358KFBG SoC
- Coppergate CG3110 chipset on-board for HomePNA support (CG3111 + CG3112)
- Silicon Labs Si3215 on-board for VoIP support
The default SSID format appears to be telusXXX, where XXX is the last 3 digits of the MAC address on the unit's label (upper case letters).
- It would appear the BSSID is randomly generated.
Serial
Pinout
The pinout is per the OpenWrt Wiki..
<---
to the wireless module
(GND) (RxD)
(GND) (3.3)
(GND) (TxD)
--> to BCM6358
Info derived from
| • boot log |
|---|
CFE version 1.0.37-12.1 for BCM96358 (32bit,SP,BE) Build Date: Mon Sep 17 16:40:05 PDT 2007 (root@pclinux-lkaplan) Copyright (C) 2000-2006 Broadcom Corporation. Boot Address 0xbe000000 Initializing Arena. Initializing Devices. Parallel flash device: name AM29LV320MT, id 0x2201, size 8192KB Auto-negotiation timed-out 10 MB Half-Duplex (assumed) CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz CPU running TP0 Total memory: 33554432 bytes (32MB) Total memory used by CFE: 0x80401000 - 0x80527F40 (1208128) Initialized Data: 0x8041D720 - 0x8041F760 (8256) BSS Area: 0x8041F760 - 0x80425F40 (26592) Local Heap: 0x80425F40 - 0x80525F40 (1048576) Stack Area: 0x80525F40 - 0x80527F40 (8192) Text (code) segment: 0x80401000 - 0x8041D718 (116504) Boot area (physical): 0x00528000 - 0x00568000 Relocation Factor: I:00000000 - D:00000000 Board IP address : 192.168.1.1 Host IP address : 192.168.1.10 Gateway IP address : Run from flash/host (f/h) : f Default host run file name : vmlinux Default host flash file name : bcm963xx_fs_kernel Boot delay (0-9 seconds) : 1 Board Id (0-9) : 96358VW Number of MAC Addresses (1-32) : 11 Base MAC Address : 02:10:18:01:00:01 PSI Size (1-64) KBytes : 24 Main Thread Number [0|1] : 0 *** Press any key to stop auto run (1 seconds) *** Auto run second count down: 0 Booting from only image (0xbe010000) ... Code Address: 0x80010000, Entry Address: 0x80010000 Decompression OK! Entry at 0x80010000 Closing network. Starting program at 0x80010000 Uncompressing Linux............................................................................................................................................................................................................................................................Ok Booting the kernel [21474536.480000] Linux version 2.6.16.14 #1 Mon Dec 6 12:34:55 IST 2010 [21474536.480000] 96358VW prom init [21474536.480000] CPU revision is: 0002a010 [21474536.480000] mpi: Detected 5 vdc 16-bit PCMCIA card [21474536.480000] Determined physical RAM map: [21474536.480000] memory: 01f00000 @ 00000000 (usable) [21474536.480000] Reserved 256k KLOG memory starting from Physical 0x01ec0000 [21474536.480000] Built 1 zonelists [21474536.480000] Kernel command line: [21474536.480000] brcm mips: enabling icache and dcache... [21474536.480000] Primary instruction cache 32kB, physically tagged, 2-way, linesize 16 bytes. [21474536.480000] Primary data cache 16kB, 2-way, linesize 16 bytes. [21474536.480000] Synthesized TLB refill handler (21 instructions). [21474536.480000] Synthesized TLB load handler fastpath (33 instructions). [21474536.480000] Synthesized TLB store handler fastpath (33 instructions). [21474536.480000] Synthesized TLB modify handler fastpath (32 instructions). [21474536.480000] PID hash table entries: 128 (order: 7, 2048 bytes) [21474536.480000] Using 150.000 MHz high precision timer. [21474536.485000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [21474536.490000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [21474536.500000] Memory: 23024k/31744k available (1986k kernel code, 8720k reserved, 317k data, 108k init, 0k highmem) [21474536.610000] Mount-cache hash table entries: 512 [21474536.615000] Checking for 'wait' instruction... available. [21474536.690000] NET: Registered protocol family 16 [21474536.695000] SCSI subsystem initialized [21474536.700000] usbcore: registered new driver usbfs [21474536.705000] usbcore: registered new driver hub [21474536.730000] NTFS driver 2.1.26 [Flags: R/O]. [21474536.735000] io scheduler noop registered [21474536.740000] io scheduler anticipatory registered (default) [21474536.745000] io scheduler deadline registered [21474536.750000] io scheduler cfq registered [21474537.310000] [21474537.310000] Random: 0x9473c980 [21474537.615000] loop: loaded (max 8 devices) [21474537.620000] Initializing USB Mass Storage driver... [21474537.625000] usbcore: registered new driver usb-storage [21474537.630000] USB Mass Storage support registered. [21474537.635000] u32 classifier [21474537.640000] OLD policer on [21474537.640000] NET: Registered protocol family 2 [21474537.695000] IP route cache hash table entries: 256 (order: -2, 1024 bytes) [21474537.700000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [21474537.705000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [21474537.710000] TCP: Hash tables configured (established 1024 bind 1024) [21474537.715000] TCP reno registered [21474537.720000] IPv4 over IPv4 tunneling driver [21474537.725000] GRE over IPv4 tunneling driver [21474537.730000] NET: Registered protocol family 1 [21474537.735000] NET: Registered protocol family 17 [21474537.740000] NET: Registered protocol family 8 [21474537.745000] NET: Registered protocol family 20 [21474537.750000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> [21474537.755000] All bugs added by David S. Miller <davem@redhat.com> [21474537.760000] brcmboard: brcm_board_init entry [21474537.760000] bcm963xx_flash: Found 1 x16 devices at 0x0 in 16-bit bank [21474537.765000] Amd/Fujitsu Extended Query Table at 0x0040 [21474537.770000] bcm963xx_flash: Swapping erase regions for broken CFI table. [21474537.775000] number of CFI chips: 1 [21474537.780000] cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. [21474537.785000] Creating 1 MTD partitions on "bcm963xx_flash": [21474537.790000] 0x00000000-0x00800000 : "openrg" [21474537.795000] bcm963xx_flash: detected at 0x1e000000 size 8388608 bytes [21474537.800000] bcm963xx_serial driver v2.0 [21474537.805000] Freeing unused kernel memory: 2105324k freed [21474540.490000] Algorithmics/MIPS FPU Emulator v1.5 [21474541.545000] insmod: add-symbol-file build/debug/rg_klog.o 0xc0003000 -s .data 0xc0003350 -s .bss 0xc00034c0 [21474541.640000] klog loaded [21474541.660000] insmod: add-symbol-file build/debug/rg_klog_ram_be.o 0xc0005000 -s .data 0xc0005760 -s .bss 0xc00058c0 [21474541.720000] klog: Using RAM buffer at address 0xa1ec0000 size 0x40000 [21474541.725000] klog: Invalid magic or checksum, reseting all information. [21474536.480000] Linux version 2.6.16.14 #1 Mon Dec 6 12:34:55 IST 2010 [21474536.480000] 96358VW prom init [21474536.480000] CPU revision is: 0002a010 [21474536.480000] mpi: Detected 5 vdc 16-bit PCMCIA card [21474536.480000] Determined physical RAM map: [21474536.480000] memory: 01f00000 @ 00000000 (usable) [21474536.480000] Reserved 256k KLOG memory starting from Physical 0x01ec0000 [21474536.480000] Built 1 zonelists [21474536.480000] Kernel command line: [21474536.480000] brcm mips: enabling icache and dcache... [21474536.480000] Primary instruction cache 32kB, physically tagged, 2-way, linesize 16 bytes. [21474536.480000] Primary data cache 16kB, 2-way, linesize 16 bytes. [21474536.480000] Synthesized TLB refill handler (21 instructions). [21474536.480000] Synthesized TLB load handler fastpath (33 instructions). [21474536.480000] Synthesized TLB store handler fastpath (33 instructions). [21474536.480000] Synthesized TLB modify handler fastpath (32 instructions). [21474536.480000] PID hash table entries: 128 (order: 7, 2048 bytes) [21474536.480000] Using 150.000 MHz high precision timer. [21474536.485000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [21474536.490000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [21474536.500000] Memory: 23024k/31744k available (1986k kernel code, 8720k reserved, 317k data, 108k init, 0k highmem) [21474536.610000] Mount-cache hash table entries: 512 [21474536.615000] Checking for 'wait' instruction... available. [21474536.690000] NET: Registered protocol family 16 [21474536.695000] SCSI subsystem initialized [21474536.700000] usbcore: registered new driver usbfs [21474536.705000] usbcore: registered new driver hub [21474536.730000] NTFS driver 2.1.26 [Flags: R/O]. [21474536.735000] io scheduler noop registered [21474536.740000] io scheduler anticipatory registered (default) [21474536.745000] io scheduler deadline registered [21474536.750000] io scheduler cfq registered [21474537.310000] [21474537.310000] Random: 0x9473c980 [21474537.615000] loop: loaded (max 8 devices) [21474537.620000] Initializing USB Mass Storage driver... [21474537.625000] usbcore: registered new driver usb-storage [21474537.630000] USB Mass Storage support registered. [21474537.635000] u32 classifier [21474537.640000] OLD policer on [21474537.640000] NET: Registered protocol family 2 [21474537.695000] IP route cache hash table entries: 256 (order: -2, 1024 bytes) [21474537.700000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [21474537.705000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [21474537.710000] TCP: Hash tables configured (established 1024 bind 1024) [21474537.715000] TCP reno registered [21474537.720000] IPv4 over IPv4 tunneling driver [21474537.725000] GRE over IPv4 tunneling driver [21474537.730000] NET: Registered protocol family 1 [21474537.735000] NET: Registered protocol family 17 [21474537.740000] NET: Registered protocol family 8 [21474537.745000] NET: Registered protocol family 20 [21474537.750000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> [21474537.755000] All bugs added by David S. Miller <davem@redhat.com> [21474537.760000] brcmboard: brcm_board_init entry [21474537.760000] bcm963xx_flash: Found 1 x16 devices at 0x0 in 16-bit bank [21474537.765000] Amd/Fujitsu Extended Query Table at 0x0040 [21474537.770000] bcm963xx_flash: Swapping erase regions for broken CFI table. [21474537.775000] number of CFI chips: 1 [21474537.780000] cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. [21474537.785000] Creating 1 MTD partitions on "bcm963xx_flash": [21474537.790000] 0x00000000-0x00800000 : "openrg" [21474537.795000] bcm963xx_flash: detected at 0x1e000000 size 8388608 bytes [21474537.800000] bcm963xx_serial driver v2.0 [21474537.805000] Freeing unused kernel memory: 2105324k freed [21474540.490000] Algorithmics/MIPS FPU Emulator v1.5 [21474541.545000] insmod: add-symbol-file build/debug/rg_klog.o 0xc0003000 -s .data 0xc0003350 -s .bss 0xc00034c0 [21474541.640000] klog loaded [21474541.660000] insmod: add-symbol-file build/debug/rg_klog_ram_be.o 0xc0005000 -s .data 0xc0005760 -s .bss 0xc00058c0 [21474541.720000] klog: Using RAM buffer at address 0xa1ec0000 size 0x40000 [21474541.725000] klog: Invalid magic or checksum, reseting all information. [21474541.735000] klog initialization succeeded [21474541.735000] klog RAM store initialization succeeded. [21474541.765000] insmod: add-symbol-file build/debug/be_pppoa_mod.o 0xc0000000 -s .data 0xc0000ee0 -s .bss 0xc0001020 [21474542.310000] insmod: add-symbol-file build/debug/one_module.o 0xc0088000 -s .main_flow 0xc00c69b0 -s .data 0xc00d3f00 -s .bss 0xc00d5b20 [21474542.515000] Loading license 12756d10c06ed9d96dd9896254d3c50ee0c276679b883cbb450fbff356416a5ef3ee2aed6da460685201b6f9b2c70994aab0835ff106a7e134f77e8507596535da8aa90b67ac8a789377fecc7c4e66932b782a4032b13f5995ce075b47fe22fd56effe2c70c3e94e039f.Dlink [21474542.520000] loading license key: Dlink [21474542.525000] loading license key: Dlink [21474542.555000] insmod: add-symbol-file build/debug/igmp_proxy_mod.o 0xc000c000 -s .data 0xc000d830 -s .bss 0xc000d9a0 Searching for flash-layout... ( 2.420000) Can't find flash layout section. Use default Press ESC to enter BOOT MENU mode. MAPS: 00400000-00740000 r-xp 00000000 00:07 909552 /mnt/cramfs/bin/openrg 10000000-10075000 rw-p 00340000 00:07 909552 /mnt/cramfs/bin/openrg 10075000-10174000 rwxp 10075000 00:00 0 [heap] 2aaa8000-2aaad000 r-xp 00000000 00:07 3599648 /mnt/cramfs/lib/ld-uClibc-0.9.28.so 2aaad000-2aaae000 rw-p 2aaad000 00:00 0 2aaec000-2aaed000 rw-p 00004000 00:07 3599648 /mnt/cramfs/lib/ld-uClibc-0.9.28.so 2aaed000-2aafd000 r-xp 00000000 00:07 4051332 /mnt/cramfs/lib/libopenrg.so 2aafd000-2ab3c000 ---p 2aafd000 00:00 0 2ab3c000-2ab3d000 rw-p 0000f000 00:07 4051332 /mnt/cramfs/lib/libopenrg.so 2ab3d000-2ab76000 r-xp 00000000 00:07 3947716 /mnt/cramfs/lib/libjutil.so 2ab76000-2abb5000 ---p 2ab76000 00:00 0 2abb5000-2abba000 rw-p 00038000 00:07 3947716 /mnt/cramfs/lib/libjutil.so 2abba000-2abc0000 rw-p 2abba000 00:00 0 2abc0000-2abf8000 r-xp 00000000 00:07 4189668 /mnt/cramfs/lib/libssl.so 2abf8000-2ac37000 ---p 2abf8000 00:00 0 2ac37000-2ac3b000 rw-p 00037000 00:07 4189668 /mnt/cramfs/lib/libssl.so 2ac3b000-2ad36000 r-xp 00000000 00:07 3613944 /mnt/cramfs/lib/libcrypto.so 2ad36000-2ad75000 ---p 2ad36000 00:00 0 2ad75000-2ad87000 rw-p 000fa000 00:07 3613944 /mnt/cramfs/lib/libcrypto.so 2ad87000-2ad8b000 rw-p 2ad87000 00:00 0 2ad8b000-2ad8d000 r-xp 00000000 00:07 3944324 /mnt/cramfs/lib/libdl-0.9.28.so 2ad8d000-2adcc000 ---p 2ad8d000 00:00 0 2adcc000-2adcd000 rw-p 00001000 00:07 3944324 /mnt/cramfs/lib/libdl-0.9.28.so 2adcd000-2addd000 r-xp 00000000 00:07 4094816 /mnt/cramfs/lib/librg_config.so 2addd000-2ae1d000 ---p 2addd000 00:00 0 2ae1d000-2ae1f000 rw-p 00010000 00:07 4094816 /mnt/cramfs/lib/librg_config.so 2ae1f000-2ae2e000 r-xp 00000000 00:07 4028548 /mnt/cramfs/lib/libm-0.9.28.so 2ae2e000-2ae6d000 ---p 2ae2e000 00:00 0 2ae6d000-2ae6e000 rw-p 0000e000 00:07 4028548 /mnt/cramfs/lib/libm-0.9.28.so 2ae6e000-2ae6f000 r-xp 00000000 00:07 4354708 /mnt/cramfs/lib/libutil-0.9.28.so 2ae6f000-2aeae000 ---p 2ae6f000 00:00 0 2aeae000-2aeaf000 rw-p 00000000 00:07 4354708 /mnt/cramfs/lib/libutil-0.9.28.so 2aeaf000-2aeb1000 r-xp 00000000 00:07 4356568 /mnt/cramfs/lib/libwl.so 2aeb1000-2aef0000 ---p 2aeb1000 00:00 0 2aef0000-2aef1000 rw-p 00001000 00:07 4356568 /mnt/cramfs/lib/libwl.so 2aef1000-2af2f000 r-xp 00000000 00:07 4268516 /mnt/cramfs/lib/libuClibc-0.9.28.so 2af2f000-2af6e000 ---p 2af2f000 00:00 0 2af6e000-2af71000 rw-p 0003d000 00:07 4268516 /mnt/cramfs/lib/libuClibc-0.9.28.so 2af71000-2af74000 rw-p 2af71000 00:00 0 7fa2a000-7fa3f000 rwxp 7fa2a000 00:00 0 [stack] [21474548.190000] insmod: add-symbol-file build/debug/rg_klog_chardev.o 0xc0009000 -s .data 0xc00093a0 -s .bss 0xc0009500 [21474548.245000] klog chardev initialized. [21474548.265000] insmod: add-symbol-file build/debug/log_chardev.o 0xc0007000 -s .data 0xc0007830 -s .bss 0xc0007980 [21474548.340000] insmod: add-symbol-file build/debug/tcp_mss.o 0xc0012000 -s .data 0xc0012560 -s .bss 0xc00126c0 [21474548.420000] insmod: add-symbol-file build/debug/rg_dhcp_pktfil.o 0xc000f000 -s .data 0xc000fe50 -s .bss 0xc000ffa0 [21474548.495000] insmod: add-symbol-file build/debug/rg_ipv4.o 0xc0016000 -s .data 0xc0016200 -s .bss 0xc0016360 [21474548.550000] IPV4 device driver registered [21474548.585000] insmod: add-symbol-file build/debug/pppoe_relay.o 0xc001e000 -s .data 0xc0020be0 -s .bss 0xc0020d00 [21474548.665000] insmod: add-symbol-file build/debug/rg_pppoe_relay.o 0xc0014000 -s .data 0xc00146e0 -s .bss 0xc0014840 [21474548.780000] insmod: add-symbol-file build/debug/bcm963xx_eth_mod.o 0xc0041000 -s .data 0xc0045f50 -s .bss 0xc0046100 [21474548.840000] Broadcom BCM6358A1 Ethernet Network Device v0.3 Dec 6 2010 12:18:33 [21474548.850000] Config Internal PHY Through MDIO [21474549.885000] BCM63xx_ENET: Auto-negotiation timed-out [21474549.890000] BCM63xx_ENET: 10 MB Half-Duplex (assumed) [21474549.940000] bcm0: MAC Address: 00:10:18:63:00:00 [21474549.945000] Broadcom BCM6358A1 Ethernet Network Device v0.3 Dec 6 2010 12:18:33 [21474549.955000] Config Ethernet Switch Through MDIO Pseudo PHY Interface [21474550.005000] bcm1: MAC Address: 00:10:18:63:00:01 [21474550.110000] insmod: add-symbol-file build/debug/bcm963xx_atmapi_mod.o 0xc0062000 -s .data 0xc0070c30 -s .bss 0xc0071060 [21474550.895000] insmod: add-symbol-file build/debug/bcm963xx_adsl_mod.o 0xc01a2000 -s .data 0xc0221b30 -s .bss 0xc02223e0 [21474550.970000] adsl: adsl_init entry [21474551.010000] insmod: add-symbol-file build/debug/bcm963xx_atm_mod.o 0xc0018000 -s .data 0xc001af40 -s .bss 0xc001b0a0 [21474551.085000] BcmAdsl_Initialize=0xC01AEE88, g_pFnNotifyCallback=0xC0221C34 [21474551.090000] AnnexCParam=0x00000000 AnnexAParam=0x00000980 adsl2=0x00000001 [21474551.165000] pSdramPHY=0xA1FFFFF8, 0xF00FF04F 0xF00FF00F [21474551.200000] AdslCoreHwReset: AdslOemDataAddr = 0xA1FEEACC [21474551.205000] AnnexCParam=0x00000000 AnnexAParam=0x00000980 adsl2=0x00000001 [21474551.215000] ATM proc init !!! [21474551.220000] AdslCoreEcUpdTmr: timeMs=-285260 ecUpdMask=0x40000 [21474551.230000] blaadd: blaa_detect entry [21474552.385000] insmod: add-symbol-file build/debug/endpointdd_mod.o 0xc0339000 -s .data 0xc03b3020 -s .bss 0xc0414340 [21474552.560000] Endpoint: endpoint_init entry [21474552.565000] BOS: Enter bosInit [21474552.570000] Enter bosAppInit [21474552.575000] Exit bosAppInit [21474552.575000] BOS: Exit bosInit [21474552.580000] Endpoint: endpoint_init COMPLETED [21474552.660000] insmod: add-symbol-file build/debug/slic_control.o 0xc0038000 -s .data 0xc00381c0 -s .bss 0xc0038320 [21474552.775000] insmod: add-symbol-file build/debug/ehci-hcd_mod.o 0xc0055000 -s .data 0xc005c5a0 -s .bss 0xc005c7a0 [21474552.880000] PCI: Enabling device 0000:00:0a.0 (0000 -> 0002) [21474552.885000] ehci_hcd 0000:00:0a.0: EHCI Host Controller [21474552.890000] ehci_init: 1 [21474552.895000] ehci_init: 2 [21474552.895000] ehci_init: 3 [21474552.900000] ehci_init: 4 [21474552.975000] ehci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1 [21474552.980000] ehci_hcd 0000:00:0a.0: irq 18, io mem 0xfffe1300 [21474552.985000] ehci_hcd 0000:00:0a.0: USB f.f started, EHCI 1.00, driver 10 Dec 2004 [21474553.035000] usb usb1: configuration #1 chosen from 1 choice [21474553.085000] hub 1-0:1.0: USB hub found [21474553.085000] hub 1-0:1.0: 2 ports detected [21474553.240000] hub 1-0:1.0: over-current change on port 1 [21474553.285000] insmod: add-symbol-file build/debug/ohci-hcd_mod.o 0xc003c000 -s .data 0xc003fbb0 -s .bss 0xc003fdc0 [21474553.390000] PCI: Enabling device 0000:00:09.0 (0000 -> 0002) [21474553.395000] ohci_hcd 0000:00:09.0: OHCI Host Controller [21474553.445000] ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2 [21474553.450000] ohci_hcd 0000:00:09.0: irq 13, io mem 0xfffe1400 [21474553.555000] usb usb2: configuration #1 chosen from 1 choice [21474553.600000] hub 2-0:1.0: USB hub found [21474553.605000] hub 2-0:1.0: 2 ports detected [21474554.825000] insmod: add-symbol-file build/debug/wl.o 0xc022c000 -s .data 0xc02ff440 -s .bss 0xc0306a00 [21474554.950000] PCI: Enabling device 0000:00:01.0 (0004 -> 0006) [21474555.025000] wl0: Broadcom BCM4318 802.11 Wireless Controller 4.150.10.15.cpe2.2b [21474555.060000] insmod: add-symbol-file build/debug/rtp.o 0xc004f000 -s .data 0xc0050eb0 -s .bss 0xc0051000 [21474555.155000] insmod: add-symbol-file build/debug/phone_mod.o 0xc005e000 -s .data 0xc005f570 -s .bss 0xc005f760 [21474555.235000] insmod: add-symbol-file build/debug/jtimer.o 0xc004a000 -s .data 0xc004a490 -s .bss 0xc004a5e0 [21474555.330000] insmod: add-symbol-file build/debug/bcm963xx_jdsp_mod.o 0xc010d000 -s .data 0xc010f5f0 -s .bss 0xc010f860 [21474555.390000] kernel::endpoint_open [21474555.390000] kernel::endpoint_open COMPLETED [21474555.395000] Enter bosStartApp [21474555.400000] [21474555.400000] [21474555.400000] bosAppRootTask() - Is it morning already? Spawning app task (epoch #0)... [21474555.400000] [21474555.405000] Enter TaskCreate aoAP [21474555.405000] TaskCreate - spawn new task aoAP [21474555.410000] Exit TaskCreate [21474555.415000] AppResetDetectionEnable() - Enabled reset detection. [21474555.420000] Exit bosStartApp [21474555.435000] PLL init completed. PLL registers set to: [21474555.440000] PCM->pcm_pll_ctrl1 = 0x00020001 [21474555.445000] PCM->pcm_pll_ctrl2 = 0x0008492B [21474555.450000] PCM->pcm_pll_ctrl3 = 0x00001E1C [21474555.465000] Set up PCM registers [21474555.465000] Channel 0 assigned to timeslot 0 [21474555.470000] Channel 1 assigned to timeslot 1 [21474555.475000] Channel 2 assigned to timeslot 2 [21474555.480000] Tx Desc (0xA1D1F000): chan 0, buf 0, sts 0xe000, len 1280, bufp 0x1c87000 [21474555.485000] Tx Desc (0xA1D1F008): chan 0, buf 1, sts 0x7000, len 1280, bufp 0x1c87510 [21474555.490000] Rx Desc (0xA1280000): chan 0, buf 0, sts 0x8000, len 1280, bufp 0x1809000 [21474555.495000] Rx Desc (0xA1280008): chan 0, buf 1, sts 0x9000, len 1280, bufp 0x1809510 [21474555.500000] initIudma: chan 0, descBase 0xa1280000, descBaseIudma 0x1280000 [21474555.505000] initIudma: chan 1, descBase 0xa1d1f000, descBaseIudma 0x1d1f000 [21474555.610000] PCM ENABLE INFO: DMA0 IRQ STATUS 0x00000000 [21474555.615000] PCM ENABLE INFO: DMA0 IRQ MASK 0x00000005 [21474555.620000] PCM ENABLE INFO: DMA1 IRQ STATUS 0x00000000 [21474555.625000] PCM ENABLE INFO: DMA1 IRQ MASK 0x00000005 [21474555.630000] PCM ENABLE INFO: PCM IRQ MASK 0x00000003 [21474555.635000] PCM ENABLE INFO: PCM IRQ PENDING 0x00000007 [21474555.640000] Enter TaskCreate CMT_EXCEPTION_IST [21474555.645000] TaskCreate - spawn new task CMT_EXCEPTION_IST [21474555.650000] Exit TaskCreate [21474555.655000] regStatus (reg 12 sel 0) = 0x10008501 [21474555.660000] regStatus (reg 12 sel 7) = 0x00000101 [21474555.665000] regCause (reg 13 sel 0) = 0x00000000 [21474555.670000] regCause (reg 13 sel 7) = 0x00808800 [21474555.675000] regCMT (reg 22 sel 0) = 0xe31e1006 [21474555.680000] regCMT (reg 22 sel 1) = 0x10008001 [21474555.685000] DSP load address = 0x81F00000 [21474555.700000] Kicking off secondary thread processor at entry point 0x81F00000... [21474555.705000] Secondary thread processor entry point at 0x81f00000 [21474555.720000] Thread processor handshake. Secondary app initialized properly. [21474555.725000] Enter TaskCreate HTSK [21474555.730000] TaskCreate - spawn new task HTSK [21474555.735000] Exit TaskCreate [21474555.740000] SUCCESS: Took semaphore [21474555.740000] SUCCESS: Gave semaphore [21474555.745000] INFO: MSPI POLLING MODE [21474555.750000] INFO: IRQ MASK 0xa0000624 [21474555.755000] INFO: IRQ STATUS 0x40400000 [21474555.755000] INFO: BLOCK ENABLES 0x3e0320 [21474555.760000] MSPI INITIALIZED [21474555.765000] slicConfigure() reading 0 from slic 0 devId 2 [21474555.790000] slicConfigure() reading 3 from slic 0 devId 2 [21474555.815000] Read Si3215 Revision H on slic 0 [21474555.835000] Direct read/write test passed on slic 0 [21474555.840000] Indirect read/write test passed on slic 0 [21474555.865000] Entering SLIC DC Power Calibration check ......Passed [21474555.870000] Entering SLIC Calibration check................Passed [21474556.230000] Entering Manual Calibration check................Passed 1 ... Passed 2 [21474557.275000] slicConfigure: Setting CODEC on slic 0 to linear 16-bit mode [21474557.280000] SLIC 0 PCM settings: txCountLow 1, txCountHi 0 [21474557.285000] SLIC 0 PCM settings: rxCountLow 1, rxCountHi 0 [21474557.310000] boardHalInit6358: Initialization complete. [21474557.315000] boardHalInit completed [21474557.315000] Enter TaskCreate HRTBEAT [21474557.320000] TaskCreate - spawn new task HRTBEAT [21474557.325000] Exit TaskCreate [21474557.330000] HEARTBEAT: Initialized! [21474557.335000] bosMsgQCreate: Created message queue VRGEVQ at address 0x0 [21474557.340000] Enter TaskCreate VRGEVPR [21474557.345000] TaskCreate - spawn new task VRGEVPR [21474557.350000] Exit TaskCreate [21474557.350000] Enter TaskCreate HCAS [21474557.355000] TaskCreate - spawn new task HCAS [21474557.360000] Exit TaskCreate *** gStartRxDesc[0] = 0xA1280000 *** gBufferSizeBytes = 1280 *** gStartTxDesc[0] = 0xA1D1F000 hal6358PcmInit 260 nextTxDesc = 0xA1D1F000 hal6358PcmInit 260 nextTxDesc = 0xA1D1F008 hal6358PcmInit 264 Ownership for TX desc not set. Use this buffer. PERF->IrqMask = 0xA0000624 PERF->IrqMask1 = 0x00800000 [21474557.415000] Default value for provItemId '209' did not exist [21474557.490000] [21474557.490000] ENDPT: hdspVhdOpen Secondary Connection VHD success. DSP 0, VHD (0x50) of type: 0x0 [21474557.660000] [21474557.660000] ENDPT: hdspVhdOpen Secondary Connection VHD success. DSP 0, VHD (0x51) of type: 0x0 [21474557.830000] [21474557.830000] ENDPT: hdspVhdOpen Secondary Connection VHD success. DSP 0, VHD (0x52) of type: 0x3 [21474558.000000] [21474558.000000] ENDPT: hdspVhdOpen Secondary Connection VHD success. DSP 0, VHD (0x53) of type: 0x3 [21474558.230000] [21474558.230000] ENDPT: hdspVhdOpen Line VHD success. DSP 0, VHD (0x54) of type: 0x7 [21474558.260000] Default value for provItemId '204' did not exist [21474558.265000] boardHalCasGetDriver: chan = 0 [21474558.270000] Default value for provItemId '41' did not exist [21474558.275000] Default value for provItemId '207' did not exist [21474558.280000] Default value for provItemId '208' did not exist [21474558.285000] Default value for provItemId '57' did not exist [21474558.290000] Default value for provItemId '206' did not exist [21474558.320000] ENDPT: Initialization completed successfully for endpt 0 [21474558.320000] [21474558.325000] boardHalCasGetDriver: chan = 0 [21474558.330000] Capabilities: [21474558.335000] G.711: TRUE [21474558.335000] G.729A: TRUE [21474558.340000] G.729: FALSE [21474558.345000] G.729E: FALSE [21474558.350000] G.729B: TRUE [21474558.350000] G.723.1: TRUE [21474558.355000] G.728: FALSE [21474558.360000] G.726: TRUE [21474558.365000] BV16: TRUE [21474558.365000] BV32: FALSE [21474558.370000] iLBC: TRUE [21474558.375000] T.38: TRUE [21474558.380000] Distributed: TRUE [21474558.380000] Wideband: FALSE [21474558.385000] ICP: TRUE [21474558.390000] GPLC: TRUE [21474558.395000] BVC: TRUE [21474558.395000] [21474558.400000] Frame rate: 10 ms [21474558.405000] [21474558.405000] Max endpts: 2 [21474558.410000] Max full connections: 2 [21474558.410000] Max lite connections: 2 [21474558.420000] Endpoint Event task started... [21474558.420000] Endpoint Packet task started [21474558.425000] voice-write task started... [21474558.455000] insmod: add-symbol-file build/debug/btn.o 0xc0036000 -s .data 0xc0036690 -s .bss 0xc0036800 [21474558.540000] insmod: add-symbol-file build/debug/qos_ingress.o 0xc0053000 -s .data 0xc0053240 -s .bss 0xc00533a0 [21474558.635000] insmod: add-symbol-file build/debug/bcm53xx_mod.o 0xc0078000 -s .data 0xc007a480 -s .bss 0xc007a5e0 [21474558.720000] Freeing CRAMFS/MODFS memory: 1280k freed Using Asterisk version 1.2.4 [21474563.010000] bcm53xx: MII port status overwritten to: connected, 100Mbit, full-duplex [21474563.495000] AnnexCParam=0x00000000 AnnexAParam=0x00000980 adsl2=0x00000000 [21474563.700000] device bcm1 entered promiscuous mode [21474564.115000] device wl0 entered promiscuous mode [21474565.140000] device wl0 left promiscuous mode [21474565.210000] device wl0 entered promiscuous mode ( 0.000000) HPNA (cg0): Loading firmware ( 0.890000) HPNA (cg0): Loading firmware /etc/coax_12-28Mhz_downloadable_cg.bin ( 4.630000) HPNA (cg0): Setting MAC address 00:c5:d9:5d:00:39 ( 5.540000) HPNA (cg0): Activating the firmware ( 6.190000) HPNA (cg0): Firmware activated successfully [21474573.145000] device bcm1 left promiscuous mode [21474573.170000] device bcm1 entered promiscuous mode ( 0.000000) HPNA (cg0): Loading firmware Username: ( 8.900000) HPNA (cg0): Loading firmware /etc/coax_12-28Mhz_downloadable_cg.bin ( 11.190000) HPNA (cg0): Setting MAC address 00:c5:d9:5d:00:39 ( 11.740000) HPNA (cg0): Activating the firmware ( 12.320000) HPNA (cg0): Firmware activated successfully |
