CLEAR Spot Voyager
CLEAR Spot Voyager
Manuf (OEM/ODM): Infomark IMW-C910W
Type: mobile hotspot
FCC ID: YCO-IMW-C910W
Power: 5 VDC, 1 A
Connector type: USB Female Micro-B
CPU1: GCT GDM7205 (160 MHz)
FLA1: 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Intel PC28F128P30BF65)
RAM1: 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Samsung K4M51163PI-BG75)
Expansion IFs: none specified
WI1 chip1: Atheros AR6003G-AC2B
WI1 802dot11 protocols: bg
WI1 antenna connector: none
bg
Additional chips
WiMAX (2.5-2.7 GHz) Power Amplifier IC;Anadigics;AWM6268;AWM6268, 35464-AE, 1246 PH;1;
Dual-Input USB/AC Adapter Charger and Smart Power Selector;Maxim;MAX8677A;8677AE, TG252, BTIZ;1;
Flags: WiMAX, battery
Default SSID: ClearSPOT_XXXXX
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 0 are CLEAR devices
Default login user: blank
Default login password: admin
blank:admin credentials used by 300 additional devices
of which 0 are CLEAR devices
802dot11 OUI: 00:1E:31
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented GCT chipsets with specifications, see GCT.
"BISCUIT_MINI 2.3G/2.5G REV1.1" and "2011.07.23" appears to be silkscreened on the board in the FCC photos.
"BISCUIT_MINI 2.3G/2.5G REV 1.2A" and "2011.10.11" would seem to be silkscreened on some (most? all?) production model boards.
- The FCC EUT's battery is marked with "OCEANSUN 554855P 5.92Wh". This Li-ion battery would appear to be manufactured by Shenzhen OceanSun Battery Co., Ltd..
Additional specifications, per CLEAR, follow...
- SKU / P/N: IFM-910CW
- Dimensions: 2.6" (D) x 2.6" (W) x 0.5" (H)
- Weight: 2.1 oz59.541 g <br />0.0595 kg <br />0.131 lbs <br />
- Battery: 1500mAh (up to 6 hours continuous run time)
- Range: 100 ft
Per the manual, you can reset the device to factory defaults by...
- Turn on the device, holding the power button down for 3-4 seconds
- Release the power button when the Power LED turns red
- When the device is powered on, press and hold the power button for 10 seconds
- Release the power button when the 4G LED turns amber. The device will then automatically turn off and has then been reset..
The SSID format used by the devices is ClearSPOT_XXXXX, where XXXXX is the last 5 digits of the WLAN MAC (lower case letters).
