ASUS RT-N11P
Jump to navigation
Jump to search
ASUS RT-N11P (A1)
Availability: common
Manuf (OEM/ODM): SGE AP699E8N3 BT267-4
FCC approval date: 01 August 2015
Country of manuf.: China
Type: wireless router, access point, range extender
FCC ID: MSQ-RT1901
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: MediaTek MT7620N (600 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Macronix MX25L6406E)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (ESMT M12L2561616A-6T)
Expansion IFs: none specified
Serial: yes, 4-pin header
WI1 chip1: MediaTek MT7620N
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
ETH chip1: MediaTek MT7620N
Switch: MediaTek MT7620N
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Stock bootloader: U-Boot
Stock FW OS: Linux 2.6.36
Default SSID: ASUS (97 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 167 are ASUS devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 198 are ASUS devices
802dot11 OUI: 38:2C:4A (2 E, 2 W), 54:A0:50 (3 E, 3 W)
Ethernet OUI: 38:2C:4A (2 E, 2 W), 54:A0:50 (3 E, 3 W)
| FCC ID | |
|---|---|
| ASUS RT-N12E B1 | MSQ-RT1901 |
| ASUS RT-N300 | MSQ-RT1901 |
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| ASUS RT-N11P | MediaTek | MediaTek | |
| ASUS RT-N11P B1 | MediaTek | MediaTek |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
3-in-1 Router/AP/Range Extender for Large Environment
- Product Page (RT-N11P) • Product Page (RT-N11P B1)
"AP699E8N3.BT267-4", "REV.1.0" and "1433" is silkscreened on the board.
Overview
- Multiple 3-in-1 Router/Access Point/Range Extender wireless modes
- Two external 5dBi antennas for more powerful and wider coverage
- 4 SSIDs help manage bandwidth allocation and access control
Reviews
- On iXBT (tested FW 3.4.3.9-091 base by Padavan)
- On FoxNetWork (images PCB)
- "AP699E8N3.BT267-4", "REV.1.0", "ASKPCB" and "1433"
- (08/2014) is silkscreened on the board in the photos.
Forum threads
- MediaTek MT7620N WiSoC is clocked 580/600MHz
- CPU: MT7620N(H) rev.0206 @600/120MHz (stock @580/116MHz)
- RAM: ESMT M12L2561616A-6T (32МB SDRAM, max 166MHz)
- Flash: Macronix MX25L6406E (8MB SPI NOR, max 80MHz)
- Quartz: 20MHz
Serial
Boot log (FW by Padavan)
| • boot log |
|---|
Jan 10 14:03:39 syslogd started: BusyBox v1.22.1 Jan 10 14:03:39 RT-N11P: bootloader version: RT-N11P-01-00-00-01 Jan 10 14:03:39 RT-N11P: firmware version: 3.4.3.8-088 Jan 10 14:03:39 kernel: klogd started: BusyBox v1.22.1 (2014-12-07 20:51:14 KRAT) Jan 10 14:03:39 kernel: Linux version 3.4.105 (padavan@hms) (gcc version 4.4.7 (GCC) ) #1 Sun Dec 7 20:50:36 KRAT 2014 Jan 10 14:03:39 kernel: Ralink SoC: MT7620N, RevID: 0206, RAM: SDRAM Jan 10 14:03:39 kernel: CPU/SYS frequency: 600/120 MHz Jan 10 14:03:39 kernel: CPU revision is: 00019650 (MIPS 24KEc) Jan 10 14:03:39 kernel: Determined physical RAM map: Jan 10 14:03:39 kernel: memory: 02000000 @ 00000000 (usable) Jan 10 14:03:39 kernel: Zone PFN ranges: Jan 10 14:03:39 kernel: Normal 0x00000000 -> 0x00002000 Jan 10 14:03:39 kernel: Movable zone start PFN for each node Jan 10 14:03:39 kernel: Early memory PFN ranges Jan 10 14:03:39 kernel: 0: 0x00000000 -> 0x00002000 Jan 10 14:03:39 kernel: On node 0 totalpages: 8192 Jan 10 14:03:39 kernel: free_area_init_node: node 0, pgdat 80266b20, node_mem_map 81000000 Jan 10 14:03:39 kernel: Normal zone: 64 pages used for memmap Jan 10 14:03:39 kernel: Normal zone: 0 pages reserved Jan 10 14:03:39 kernel: Normal zone: 8128 pages, LIFO batch:0 Jan 10 14:03:39 kernel: Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. Jan 10 14:03:39 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes Jan 10 14:03:39 kernel: pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 Jan 10 14:03:39 kernel: pcpu-alloc: [0] 0 Jan 10 14:03:39 kernel: Built 1 zonelists in Zone order, mobility grouping off. Total pages: 8128 Jan 10 14:03:39 kernel: Kernel command line: console=ttyS0,115200n8 root=/dev/mtdblock4 rootfstype=squashfs Jan 10 14:03:39 kernel: PID hash table entries: 128 (order: -3, 512 bytes) Jan 10 14:03:39 kernel: Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Jan 10 14:03:39 kernel: Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Jan 10 14:03:39 kernel: Writing ErrCtl register=000137f0 Jan 10 14:03:39 kernel: Readback ErrCtl register=000137f0 Jan 10 14:03:39 kernel: Memory: 29732k/32768k available (2135k kernel code, 3036k reserved, 324k data, 156k init, 0k highmem) Jan 10 14:03:39 kernel: NR_IRQS:64 Jan 10 14:03:39 kernel: console [ttyS0] enabled Jan 10 14:03:39 kernel: Calibrating delay loop... 397.82 BogoMIPS (lpj=795648) Jan 10 14:03:39 kernel: pid_max: default: 32768 minimum: 301 Jan 10 14:03:39 kernel: Mount-cache hash table entries: 512 Jan 10 14:03:39 kernel: NET: Registered protocol family 16 Jan 10 14:03:39 kernel: bio: create slab <bio-0> at 0 Jan 10 14:03:39 kernel: Switching to clocksource MIPS Jan 10 14:03:39 kernel: NET: Registered protocol family 2 Jan 10 14:03:39 kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes) Jan 10 14:03:39 kernel: TCP established hash table entries: 1024 (order: 1, 8192 bytes) Jan 10 14:03:39 kernel: TCP bind hash table entries: 1024 (order: 0, 4096 bytes) Jan 10 14:03:39 kernel: TCP: Hash tables configured (established 1024 bind 1024) Jan 10 14:03:39 kernel: TCP: reno registered Jan 10 14:03:39 kernel: UDP hash table entries: 256 (order: 0, 4096 bytes) Jan 10 14:03:39 kernel: NET: Registered protocol family 1 Jan 10 14:03:39 kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher Jan 10 14:03:39 kernel: msgmni has been set to 58 Jan 10 14:03:39 kernel: io scheduler noop registered (default) Jan 10 14:03:39 kernel: Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled Jan 10 14:03:39 kernel: serial8250: ttyS0 at MMIO 0x10000c00 (irq = 12) is a 16550A Jan 10 14:03:39 kernel: Ralink GPIO driver initialized. Number of GPIO: 73, GPIO mode: 007A911D Jan 10 14:03:39 kernel: Ralink SPI flash driver, SPI clock: 30MHz Jan 10 14:03:39 kernel: MX25L6405D (c2 2017c220) (8192 Kbytes) Jan 10 14:03:39 kernel: Creating 7 MTD partitions on "raspi": Jan 10 14:03:39 kernel: 0x000000000000-0x000000030000 : "Bootloader" Jan 10 14:03:39 kernel: 0x000000030000-0x000000040000 : "Config" Jan 10 14:03:39 kernel: 0x000000040000-0x000000050000 : "Factory" Jan 10 14:03:39 kernel: 0x000000050000-0x00000012fed0 : "Kernel" Jan 10 14:03:39 kernel: 0x00000012fed0-0x0000007c0000 : "RootFS" Jan 10 14:03:39 kernel: 0x0000007c0000-0x000000800000 : "Storage" Jan 10 14:03:39 kernel: 0x000000050000-0x000000800000 : "Firmware_Stub" Jan 10 14:03:39 kernel: PPP generic driver version 2.4.2 Jan 10 14:03:39 kernel: PPP MPPE Compression module registered Jan 10 14:03:39 kernel: NET: Registered protocol family 24 Jan 10 14:03:39 kernel: PPTP driver version 0.8.5 Jan 10 14:03:39 kernel: Ralink APSoC Ethernet Driver v3.1.4 (raeth) Jan 10 14:03:39 kernel: raeth: RX Ring 256, TX Ring 1*256. Max packet size 1536 Jan 10 14:03:39 kernel: raeth: NAPI support, weight 32 Jan 10 14:03:39 kernel: nf_conntrack version 0.5.0 (8192 buckets, 16384 max) Jan 10 14:03:39 kernel: xt_time: kernel timezone is -0000 Jan 10 14:03:39 kernel: gre: GRE over IPv4 demultiplexor driver Jan 10 14:03:39 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team Jan 10 14:03:39 kernel: TCP: cubic registered Jan 10 14:03:39 kernel: NET: Registered protocol family 17 Jan 10 14:03:39 kernel: Bridge firewalling registered Jan 10 14:03:39 kernel: L2TP core driver, V2.0 Jan 10 14:03:39 kernel: PPPoL2TP kernel driver, V2.0 Jan 10 14:03:39 kernel: 8021q: 802.1Q VLAN Support v1.8 Jan 10 14:03:39 kernel: ASUS NVRAM, v0.07. Available space: 61440. Integrity: OK Jan 10 14:03:39 kernel: VFS: Mounted root (squashfs filesystem) readonly on device 31:4. Jan 10 14:03:39 kernel: Freeing unused kernel memory: 156k freed Jan 10 14:03:39 kernel: Algorithmics/MIPS FPU Emulator v1.5 Jan 10 14:03:39 kernel: rt2860v2_ap: module license 'Proprietary' taints kernel. Jan 10 14:03:39 kernel: APSoC AP Driver version: 2.7.2.0 Jan 10 14:03:39 kernel: mtk_esw - hw bridge: W|LLLL Jan 10 14:03:39 kernel: raeth: HW VLAN TX offload enabled Jan 10 14:03:39 kernel: raeth: HW IP/TCP/UDP checksum RX/TX offload enabled Jan 10 14:03:39 kernel: raeth: HW Scatter/Gather TX offload enabled Jan 10 14:03:39 kernel: device eth2.1 entered promiscuous mode Jan 10 14:03:39 kernel: device eth2 entered promiscuous mode Jan 10 14:03:41 kernel: mtk_esw: Link Status Changed - Port WAN Link Up Jan 10 14:03:43 kernel: ch1 bssid=40:16:7e:xx:xx:xx Jan 10 14:03:43 kernel: ch6 bssid=ac:f1 f:xx:xx:xx Jan 10 14:03:43 kernel: ch6 bssid=34:e0:cf:xx:xx:xx Jan 10 14:03:43 kernel: ch11 bssid=d8:6c:e9:xx:xx:xx Jan 10 14:03:43 kernel: ch11 bssid=00:1f:ce:xx:xx:xx Jan 10 14:03:43 kernel: ===================================================== Jan 10 14:03:43 kernel: Channel 1 : Dirty = 70, False CCA = 2, Busy Time = 0, Skip Channel = FALSE Jan 10 14:03:43 kernel: Channel 2 : Dirty = 72, False CCA = 6, Busy Time = 0, Skip Channel = FALSE Jan 10 14:03:43 kernel: Channel 3 : Dirty = 76, False CCA = 2, Busy Time = 0, Skip Channel = FALSE Jan 10 14:03:43 kernel: Channel 4 : Dirty = 80, False CCA = 11, Busy Time = 0, Skip Channel = FALSE Jan 10 14:03:43 kernel: Channel 5 : Dirty = 84, False CCA = 16, Busy Time = 0, Skip Channel = FALSE Jan 10 14:03:43 kernel: Channel 6 : Dirty = 140, False CCA = 119, Busy Time = 0, Skip Channel = FALSE Jan 10 14:03:43 kernel: Channel 7 : Dirty = 104, False CCA = 17, Busy Time = 0, Skip Channel = FALSE Jan 10 14:03:43 kernel: Channel 8 : Dirty = 104, False CCA = 565, Busy Time = 0, Skip Channel = FALSE Jan 10 14:03:43 kernel: Channel 9 : Dirty = 104, False CCA = 23, Busy Time = 0, Skip Channel = FALSE Jan 10 14:03:43 kernel: Channel 10 : Dirty = 104, False CCA = 30, Busy Time = 0, Skip Channel = FALSE Jan 10 14:03:43 kernel: Channel 11 : Dirty = 140, False CCA = 9, Busy Time = 0, Skip Channel = FALSE Jan 10 14:03:43 kernel: Channel 12 : Dirty = 64, False CCA = 10, Busy Time = 0, Skip Channel = FALSE Jan 10 14:03:43 kernel: Channel 13 : Dirty = 56, False CCA = 3, Busy Time = 0, Skip Channel = FALSE Jan 10 14:03:43 kernel: ===================================================== Jan 10 14:03:43 kernel: Rule 1 CCA value: Min Dirtiness => Select Channel 13 Jan 10 14:03:43 kernel: Min Dirty = 56 Jan 10 14:03:43 kernel: ExChannel = 9 , 0 Jan 10 14:03:43 kernel: BW = 40 Jan 10 14:03:43 kernel: device ra0 entered promiscuous mode Jan 10 14:03:44 kernel: br0: port 2(ra0) entered forwarding state Jan 10 14:03:44 kernel: br0: port 1(eth2.1) entered forwarding state Jan 10 14:03:45 dnsmasq[151]: started, version 2.72 cachesize 256 Jan 10 14:03:45 dnsmasq[151]: compile time options: no-IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-scripts no-TFTP no-conntrack no-ipset no-auth no-DNSSEC no-loop-detect Jan 10 14:03:45 dnsmasq-dhcp[151]: DHCP, IP range 192.168.1.2 -- 192.168.1.244, lease time 1d Jan 10 14:03:45 dnsmasq-dhcp[151]: DHCP, sockets bound exclusively to interface br0 Jan 10 14:03:45 dnsmasq[151]: read /etc/hosts - 3 addresses Jan 10 14:03:45 dnsmasq[151]: read /etc/storage/dnsmasq/hosts - 0 addresses Jan 10 14:03:45 kernel: Ralink HW NAT v2.51.2 Module Enabled, FoE Size: 8192 Jan 10 14:03:45 RT-N11P: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN] Jan 10 14:03:45 RT-N11P: Hardware NAT/Routing: IPv4 UDP flow offload - ON Jan 10 14:03:45 DHCP MAN Client: starting on eth2.2 ... Jan 10 14:03:45 DHCP MAN Client: bound (eth2.2), IP: 10.51.160.xx, GW: 10.51.160.1, lease time: 182278 Jan 10 14:03:45 RT-N11P: MAN up (eth2.2) Jan 10 14:03:45 dnsmasq[151]: read /etc/hosts - 3 addresses Jan 10 14:03:45 dnsmasq[151]: read /etc/storage/dnsmasq/hosts - 0 addresses Jan 10 14:03:45 dnsmasq[151]: using nameserver 213.234.192.8#53 Jan 10 14:03:45 dnsmasq[151]: using nameserver 85.21.192.3#53 Jan 10 14:03:46 kernel: br0: port 2(ra0) entered forwarding state Jan 10 14:03:46 kernel: br0: port 1(eth2.1) entered forwarding state Jan 10 14:03:47 xl2tpd[201]: Using l2tp kernel support. Jan 10 14:03:47 xl2tpd[202]: xl2tpd version xl2tpd-1.3.6 started on RT-N11P PID:202 Jan 10 14:03:47 xl2tpd[202]: Connecting to host tp.internet.beeline.ru, port 1701 Jan 10 14:03:47 xl2tpd[202]: Connection established to 89.179.76.xx, 1701. Local: 65530, Remote: 4540 (ref=0/0). Jan 10 14:03:47 xl2tpd[202]: Calling on tunnel 65530 |
See also
- ASUS RT-N11P - N300 (300Mbps) • Product Page
- ASUS RT-N11P B1 - N300 (300Mbps) • Product Page
- ASUS RT-N14U - N300 (300Mbps) • Product Page
- ASUS RT-N300 - N300 (300Mbps) • Product page (US)
- ASUS RT-N300 B1 - N300 (300Mbps) • Product page
- ASUS RT-N600 - N600 (300+300Mbps) • Product Page (US)
Images
Asus RT-N11P PCB top
RT-N11P PCB bottom
