AMIT WIP-301

AMIT WIP-301

FCC approval date: 14 December 2000
Country of manuf.: Taiwan

Type: wireless router

FCC ID: PBLWIP-301

Power: 5 VDC, 3 A
Connector type: barrel

CPU1: AMD Am186
FLA1: ? MiB (Brand? Model?)
RAM1: ? MiB (Brand? Model?)

Expansion IFs: Parallel
Serial: DE-9

WI1 module: Gemtek WLANAP00
WI1 chip1: No Wires Needed Poldhu
WI1 chip2: Intersil HFA3861
WI1 chip3: Intersil HFA3683A
WI1 802dot11 protocols: b
WI1 antenna connector: none

ETH chip1: Realtek RTL8019AS
ETH chip2: Realtek RTL8019AS
Switch: Kendin KS8995
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1

b

Flags: schematics, block diagram

Default IP address: 192.168.123.254
the IP 192.168.123.254 is used by 28 additional devices
of which 13 are AMIT devices
Default login user: blank
Default login password: admin
blank:admin credentials used by 300 additional devices
of which 11 are AMIT devices

802dot11 OUI: none specified

For a list of all currently documented AMD chipsets with specifications, see AMD.
For a list of all currently documented No Wires Needed (NWN) chipsets with specifications, see No Wires Needed.

---

"34-WIP301-3B VER B" (or something like that) is silkscreened on the mainboard in the FCC photos.

LAN and WAN interfaces for the router are both 10Mbit. The switch is, however, 10/100 Mbit capable.

This device is assumed to use NWN's Poldhu chip.

Default settings (including the SSID) are per the FCC manual.

The power supply shown in the FCC photos is a SILICORE SWF-5 Rev 1.0a (90-264VAC ~ 50/60Hz -> 5VDC, 3A).