4ipnet HSG200

4ipnet HSG200

Manuf (OEM/ODM): LanReady

FCC approval date: 23 September 2010
Country of manuf.: Taiwan

Type: access point

FCC ID: SCD020067

Power: 12 VDC, 1.5 A
Connector type: barrel

CPU1: Atheros AR7240
FLA1: ? MiB (Brand? Model?)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Hynix HY5DU121622DTP-D43)

Expansion IFs: USB 2.0
USB ports: 1
Serial: DE-9

WI1 chip1: Atheros AR9283
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL, RP-SMA

ETH chip1: Atheros AR7240
Switch: Atheros AR7240
LAN speed: 100M
LAN ports: 2
WAN speed: 100M
WAN ports: 1

bgn

Default SSID: HSG200-1
, HSG200-2
Default IP address: 192.168.1.254
the IP 192.168.1.254 is used by 158 additional devices
of which 0 are 4ipnet devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1332 additional devices
of which 3 are 4ipnet devices

802dot11 OUI: none specified

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

---

Wireless Hotspot Gateway
Datasheet

"FN3A" and "REV:1.2" is silkscreened on the board in the FCC photos.

This is a LanReady OEM product.

The FCC test report lists additional models identified by this FCC ID. They are as follows..

• 3 Port
  • Cenwell CHG-920X
  • LanReady AC920X
  • Wavecore WV-200HS
  • TRENDnet TEW-656HG
  • Pheenet WAS-105R
  • Airlink101 AR700HSN
  • Cerio WMR-200N
  • 4ipnet HSG200
  • Cipherium W1110
  • LevelOne WHG-1000
  • Kozumi K-500HPG
  • Wiborne HSG-100
  • USC W1110
  • RayTalk RA-5n5
  • Cenwell CAP-952X
  • LanReady AP952X
  • Wavecore WV-100IA
  • Pheenet WAP-854NP
  • Cerio WM-200N
  • Kozumi K-520WPG
  • Wiborne WAP-100
• 2 Port
  • 4ipnet EAP200
  • 4ipnet EAP206
  • Cipherium A210
  • Cipherium A216
  • USC A210
  • USC A216
  • RayTalk RA-1000
  • (not listed, redirects to LanReady FCC ID) OvisLink AirLive WIAS-3200N (FCC ID: ODMWIAS32N)

Per 4ipnet's manual...

• 192.168.1.254 IP for the Private subnet, no authentication required, admin:admin credentials
• 192.168.11.254 IP for the Public subnet, authentication required
• Default SSIDs of HSG200-1 (private, disabled by default, however?) and HSG200-2 (public)
  • WiGLE shows a few HSG200-2 SSIDs - w/ 06:1F:D4 (4) or 06:11:6B (1) OUIs